Blacksmithing banner

Home

Home

Youtube graphic
I have a youtube channel with over 1000 Videos!


Become a Patron


Blacksmithing

Blacksmithing Lessons

Forge Stuff

Blacksmithing Projects

Resources and More Stuff

My other Subjects and websites



Will
Hi, Thanks for visiting my website. My name is Will and if you have questions
or would like to
contribute projects or ideas you can contact me Will

Knife Blanks

You can custom make your own knife which is a lot of fun and quite a bit easier if you buy yourself the parts like the knife blank and the handle blanks. Here I have a selection of steel knife blanks for you to choose from.

 

Hunting Knife Blanks

Morakniv Classic No.3 Carbon Steel 5.9 Inch Knife Blade Blank -

Morakniv knife blade blanks are an excellent choice for anybody wishing to make their own custom knife. The Classic No. 3 knife blade blank features a 5.9-inch carbon steel blade which achieves a high level of hardness, sharpens easily and is exceptionally tough. High carbon steels are preferred in applications that demand durability and frequent regrinding. Morakniv has been manufacturing the highest-quality knives in Mora, Sweden since 1891. Professionals worldwide trust the quality materials and fine craftsmanship of Mora Knives. Knife blade blank only, does not include handle or sheath.

 

Morakniv No. 2000 Stainless Steel 4.5 Inch Knife Blade Blank -

The Morakniv No. 2000 knife blade blank features a 4.5-inch Sandvik stainless steel blade which is ideally suited for hunting, fishing, and outdoor applications where knives see hard use and are commonly exposed to dirt and moisture. The chromium content of stainless steel makes them less susceptible to corrosion and oxidation than carbon steels, giving them a longer life overall. Mora Knives are made from high-quality Sandvik steel. Sandvik knife steels are characterized by ultra-fine carbides that result in superb forging and hardening properties. The absence of large carbide deposits promotes excellent edge sharpness for optimum cutting performance.

 

Szco Supplies Clip Point Blade Hunting Knife -

This 6.25 Inch Drop Point Blade Blank by Szco Supplies is 6.25 inches in overall length with a blade length of 2.25 inches and a tang length of 4 inches. It is constructed of stainless steel. It is full tang and comes with a brass guard.

 

Set of 2 Blades for Knife Making (5 1/4" & 7 1/2") Mini Hunter Blank Custom Game Hunting Blanks Skinning Knives

 

 

 

Damascus Knife Blanks

Damascus Dagger Blank Boot Hunting Knife Blade Double Edge 1095HC High Carbon -

This item is for hunting. This blade is handmade from 1095 steel and 15n20. As you may know, 1095 is a traditional and sought after American high carbon steel that is prized for knife blades. It is hardened to about 57-60 on the Rockwell C scale (HRC). This blade is a serious blade that will work well for hunting and fishing. It can be easily sharpened at home or in the field, and will hold an edge very well. It is genuine layered damascus steel (not fake or imitation damascus). Pin hole sizes may vary and we are not able to determine the size of the holes of the exact product you will receive since it will be shipped by Amazon. Blank may require additional sharpening.

 

Damascus Large Tactical Knife Blank Blade Hunting Skinning Skinner Steel 1095HC

This blade is handmade from 1095 steel and 15n20. As you may know, 1095 is a traditional and sought after American high carbon steel that is prized for knife blades. It is hardened to about 57-60 on the Rockwell C scale (HRC). This blade is a serious blade that will work well for hunting and fishing. It can be easily sharpened at home or in the field, and will hold an edge very well. It is genuine layered damascus steel (not fake or imitation damascus). Blank may require additional sharpening.

 

Damascus Knife Making Knives Blank Blade Billet Bar Blade Steel Layers Raindrop

This blade is handmade from 1095 steel and 15n20. As you may know, 1095 is a traditional and sought after American high carbon steel that is prized for knife blades. It is hardened to about 57-60 on the Rockwell C scale (HRC). This blade is a serious blade that will work well for hunting and fishing. It can be easily sharpened at home or in the field, and will hold an edge very well. It is genuine layered damascus steel (not fake or imitation damascus). Blank may require additional sharpening.

 

Damascus High Carbon Steel Tanto Hunting Blank Blade Knife

This item is for hunting. This blade is handmade from 1095 steel and 15n20. As you may know, 1095 is a traditional and sought after American high carbon steel that is prized for knife blades. It is hardened to about 57-60 on the Rockwell C scale (HRC). This blade is a serious blade that will work well for hunting and fishing. It can be easily sharpened at home or in the field, and will hold an edge very well. It is genuine layered damascus steel (not fake or imitation damascus). Blank may require additional sharpening.

 

Bowie Knife Blanks

 

Knife Blanks 003 15 1/4" Overall Bowie Blade -

Knife Blanks - 15 1/4" Overall Bowie Blade. Model: BL003. 10" stainless blade. Brass finger guard.

 

Knifemaking Knife Blade Stainless Bowie, 17 1/4 in

Knifemaking Knife Blade Stainless Bowie, 17 1/4 in. BL062

 

Knife Blanks 015 12" Overall Bowie Fighter Knife Blade -

Knife Blade Bowie Fighter. 12" overall. 7 3/8" stainless clip point blade. Brass guard. Bulk packed. Ideal for the do-it-yourself knifemaker.

 

 

Various Other Blanks

 

Condor Tool & Knife Bushlore Blade Knife Blank -

Condor took one of the best selling knives "The Bushlore" and made it possible for you to create your own custom knife. Condor will allow you to take the 3.0mm blade that's made out of the 1075 high carbon steel and create a unique "ONE OF A KIND" knife. This blade blank has an overall length of 9 5/16" with a blade length of 4 5/16". Bushlore Blank weighs.28 lbs.

 

 

Drop Point Knife Blank - 8 1/4 Overall length -

Knife Blanks - 8 1/4" Overall Drop Point Knife Blade. Model: BL014. 4" stainless blade. Brass finger guard. Full Tang. Ideal for the do-it-yourself knifemaker. Bulk packed.

 

 

 

9 1/4" Overall Upswept Skinner Knife Blade -

Knife Blanks - 9 1/4" Overall Upswept Skinner Knife Blade. Model: BL7704. 5" blade. Full tang. Brass guard. Bulk packed. Made in Pakistan.

 

 

MORE KNIFE BLANKS AND KNIFE MAKING SUPPLIES RIGHT HERE ON AMAZON

 

Wayne Goddard's $50 Knife Shop, Revised Wayne Goddard's $50 Knife Shop, Revised

You don't need to spend a fortune to start making fantastic knives. Noted knifemaker Wayne Goddard provides outstanding step-by-step instructions for making your own tools, finding the right steel and forging, grinding and heat-treating knives on a budget.

 

 

 

 


 

Sign up for my newsletter!

Do you like making projects and exploring a variety of hobbies?

Sign up for my free newsletter. I give you regular updates on hobbies and projects you can make. it is totally free and I don't share your email with anybody.